LS4 Into an MGB

Started by Scott Costanzo, October 22, 2013, 09:12:39 PM

Previous topic - Next topic

billymgb1000

Hello scott
I'm just wondering this ls4 is it a 5.7? you may have already said but I missed it. thanks fellow ls man (lol)

MGBV8

It's a 5.3L rated at 303 horsepower and 325 ft-lbs of torque at the crank.

Looks like you are supposed to run 91+ octane, Scott.  I have to run high test in my 215.
Carl

Scott Costanzo

Hey Bill, as Carl already pointed out it is a 5.3.

Carl, yeah, I'm running high test in it.

billymgb1000

Thanks I run 91 in mine also, mine is the 4.8 carbureted you have to love it good luck scott. I know I still after 15,000 miles can't get enough

Capt'n Moorgone

Thanks Scott, but these cars are always evolving. Mine has had nearly twenty years of it. I just got a head start on you!

Indy should be a blast!

Scott Costanzo

Two more days to work on the car! No pictures tonight but things are progressing. I have just shy of 200 miles on the car now. It is running better than where it started from for sure. Got the radiator ducting painted but not installed yet. I put the car up on jack stands last weekend and inspected things. Nothing seems out of place. I did tighten and use some blue loctite on the two motor mount bolts.....one of them was slightly loose. It was something I've been meaning to do. So my brakes started feeling weird. It is the master cylinder. Just what I needed but it's better it happened now. The new one came today. I can't complain, I got over 25 years out of a rebuild! Also noticed a squeaky idler pulley so I'm going to replace it too. I'm feeling pretty confident the car will make the trip but it's still very rough at this point.

Artie is coming in on Monday afternoon and we will spend Tuesday on the car. He's going to detail it for me. Hope I'm not spending the whole day under the car!

Several of us are going to meet up at Mike Maloney's on Wednesday and caravan to Indy. Mike Moor, yeah, Indy is going to be a blast! Looking forward to seeing everyone!

MGBV8

I saw someone at the V8 Meet that could not wipe that ear-to-ear grin off his face.......  :)
Carl

danmas

QuoteI saw someone at the V8 Meet that could not wipe that ear-to-ear grin off his face....... :)

And not without good reason.  Outstanding workmanship.

Scott Costanzo

Hey Carl,

Yeah, still can't! :-)

Made it there and back with no real issues which was great. I've got over 500 miles on it at this point. The only issue we had was a slight hiccup every once in a while at speeds above 65 mph and going up hill. Kind of hard to describe....like letting off the throttle for just a moment. I'll have to try to get logs of this happening at some point.

I was real pleased with the cooling system as well. The weather was quite hot and we had no issues. The drive to and from Skillman's was a great test. I got a Volvo fan from Calvin which I'll get installed at some point before winter I hope. That should give me some extra insurance. Barry Glass has one installed with a manual switch and he turned it on for us. It moves an amazing amount of air!

It was good to see you and everyone else!

Scott Costanzo

QuoteAnd not without good reason. Outstanding workmanship.

Thank you Dan!

rficalora

Yeah, very well done Scott.  Clean install.  You can tell you took time on all the little details!

kstevusa

Scott, the car is a "Work of Art",  This is the way Abington could have done it :-).  Hate we all did not get to share a DIckel, I just barely got to have a lite 2-3 hit during the situation.  See you and Artie in Townsend.

mgb260

I wasn't there but, I can picture Scott smiling the whole time! Great job! As far as I know, the only RWD LS4 starter solution!

Scott Costanzo

Thank you Rob, Kelly and Jim, I appreciate it!

Kelly, I regret we didn't share a Dickel too. The time just flew by! There were several people I didn't get to talk to as much as I wanted. Hard to believe it's been about a week since the meet got started. Guess it's good that we leave wanting it to go a bit longer. Artie and I were just saying today that we're ready to do it again! :) Oh, I'm so glad Sandy is recovering so well. She scared us there for a little while!

I'm planning to document the sorting out phase in this thread but it will be a few weeks before I get back to work. I'm going to get some things on the honey do list done first.

Scott

Scott Costanzo

I thought I'd do a small update and talk about weighing the car at the V8 Meet.

Pete Mantell brought his scales to Indy which was great since I was/am very interested in where the car stands. To give a point of reference, the last time I had the car weighed was in 2008 at the Wisconsin meet. Just so happens on the very same set of scales. At that time I had my 3.1 V6 in the car and it weighed 2019 lbs. with half a tank of gas. In Indy, I believe Pete said I weighed 2106 lbs. with only a 1/4 tank of gas. So if I add 25 lbs. to account for the lack of gas in the tank it puts the weight at 2131 lbs. give or take. So I've added about 110 lbs. going with the LS4. I never weighed the V6 unfortunately but that generation was very light. I'm guessing at or just below 300 lbs. I have a reprint of the factory owner's manual for my 68 somewhere...looked briefly but couldn't find it. Anyway, I seem to recall the manual had the "curb weight" at 21xx lbs. Can't remember the exact figure. Bottom line, I think the car weighs close to what a factory 68 weighed. I'm pleased with that.

So, as you can imagine, there are a few things on the list to be sorted. The things I'd like to do before the Fall Gathering are:

o Try to sort out the knock sensor issue
o Fix a leak in the transmission
o Get the tach sorted
o Adjust the pedal heights
o Put in a new windshield to top seal

I've pushed the car a bit harder this past weekend than I have up to this point. I was giving some dinner guests a ride around the block and nailed it in 2nd and then into 3rd. I think they liked it...I know I did. I thought I might have heard some pinging though so the knock sensor thing moved up the list. One of the things I'm seeing with the issue I'm experiencing is the sensor's might not be torqued correctly so that's one thing I'll be checking.

This winter I'll try to get to the following things:

o Install the Volvo fan
o Get the fuel pump I really want to use installed
o Perhaps get a new rear axle and maybe even get it installed
o Maybe add factory cruise control
o Finally install the GAZ coil over shocks on the front end
o Re-enforce the front of the rear spring mount
o Several other small things to numerous to mention

I haven't had a chance to touch the car since the meet but hope to soon. :)

RMO 699F

Scott, what is the exact issue on the pedal heights?

Scott Costanzo

QuoteScott, what is the exact issue on the pedal heights?


Good question Mike. There are two things I want to change. Currently the throttle pedal is at about the same height as the brake pedal and I like it lower than the brake by 3/4" to 1". That should be fairly easy to adjust and I meant to do it before the Meet but time ran out. The second issue is when I put the seat in the most comfortable position for me I can't quite push the clutch pedal all the way to the floor so I want to move the clutch pedal pad rearward maybe an inch at the most. Those two adjustments should make the driving position much more comfortable especially on a long trip.

MGBV8

Weigh-in from Indy V8 Meet:

Scott' Costanzo's 1968 5.3L Chevy MGB = 2104 lbs.

Steve Carrick's 1974 302 Ford MGB = 2252 lbs.

That is fantastic, Scott!   Scratching my head, wondering how that can be?!
Carl

billymgb1000

Hey Carl
I think it's because of all the aluminum parts on these L/S engines. I know on mine the heads,oil pan, intake, front timing cover is all aluminum. and that's all factory.

MGBV8

Yeah, but an LS is not that much lighter. Steve has aluminum heads, intake, & a Fast Cars front end that is much lighter. I just don't see 150 lbs difference. A 2100 lb. MGB with a LS engine is outstanding!
Carl

Jim Stabe

How much gas was in it? 15 gallons of gas weighs over a hundred pounds.

MGBV8

Good point, Jim. I believe they both have stock 12 gallon fuel tanks. One empty, one full?  I don't think that is all of the story.
Carl

Scott Costanzo

Thanks Carl! I only had a quarter of a tank, roughly about 3 gal, when it was weighed. Another difference is I don't have a roll bar but that might be a wash with my car still having the stock front end. I tried to keep weight in mind as I was building the car so hopefully that helped too. I believe the biggest factor is earlier cars are lighter. I was very pleased, I was hoping to be in the mid-2100 lb. range.

FYI, Pete mentioned he weighed an LS and got, if I heard him correctly, about 360-370 lbs.

MGBGT?

I know why  Scott's car was so light......It didn't have the Artie Clark suspension lower kit in it at the time.......  :)

danmas

Interesting to compare the corner weights:

LF:  + 9 lbs

RF:  - 12 lbs

LR:  + 90 lbs

RR:  + 62 lbs.