Rover 3.5 engine builder

[gonzosal]

Hey guys,
Can anyone recommend an engine builder in the Seattle, WA/ Portland, Or area that is familiar with building the BOP/Rover 3.5 liter motors? I would appreciate any suggestions regarding builders and/or parts suppliers. Thanks all.
Sal

[roverman]

EGR motor, possibly 3.9L ? What does stamping say ?  No mystery on rebuilding this engine. Silvolite makes cast pistons. Northwest Britsh has parts. I bet Jim Nichols-knows.  Good Luck, roverman.

[mgb260]

Years ago Phil Baker in Everett was THE guy, but he passed away. I don't know if his family kept the shop going or not. I usually do all my own work. There are some good MGB resto shops around but,  I don't know how much they know about the Buick/Rover V8. I'm currently in Kingman, AZ.

[BlownMGB-V8]

I know Phil's son was running the place. Don't know if he still is.

Jim

[MGBV8]

If you don't want to tackle it, see if Bill Jacobson (MG four six eight) is interested. He's in Burlington, Washington. He does top notch work.

http://www.britishv8.org/MG/BillJacobson.htm

[40indianss]

autosport in seattle (near ballard bridge on 15th av nw) 206-621-1940  john or terry for engine work  brad for parts  terry recently built my 4.6 rover  lots of good advice and willing to share  complete machine shop

[hoffbug]

Sad about Phil. Ive bought some things from him a few years ago.. At the time he said his son was inventorying things and moving them into storage.. I had tried the number earlier today before I read this and it was disconnected.