New to the Gallery... Mike's Rover/Buick Aluminum Stroker

Started by Moderator, June 11, 2010, 05:40:33 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

Moderator

June 11, 2010, 05:40:33 PM
Check it out!  <a href="http://www.britishv8.org/MG/MikeJelinek-MGB.htm">Mike Jelinek's 1980 MGB-LE with 295cid / 4.9L All-Aluminum Stroker Motor</a>



1971 MGB GT V8
Buick 215 w/ Rover heads, custom EFI & crank-fired ignition.
Custom front and rear coilover suspensions.

castlesid

#1
June 11, 2010, 08:41:50 PM
Nicely done, presumably with a Buick 300 Crank.

The blockhugger headers will be costing Mike a lot of power especially with a 4.9 engine and the air filter is also too small for the application and will restrict breathing at higher RPM.

Kevin.
Print
Go Up Pages1
User actions