ATL Filler Cap

[NAS1966]

Just saw Paul Schil's remote filler - loved it.  Where did you source the connecting hoses?  


Thanks

[rficalora]

I used a Hagan fuel door and mounted it a bit higher than Paul did his, but concept is the same.  I used some straight fuel filler hose I got from a local auto parts store & a couple of 45* stainless bends that I picked up from a mufler shop to make the bends.  I had to do a bit of minor fabrication on the one that couples to the fuel tank to get the diameters to match.

[ex-tyke]

Must admit to stealing Rob's Hagan fuel fill design and location

[NAS1966]

Thank you for your replies.

[psmg]

Norbert,
I purchased the fuel from Summit Racing. It is recommended for fuel cell applications.

IMG_0583.JPG[/attach]

[psmg]

Norbert , here's another

[ex-tyke]

Fuel filler piping typically consists of aluminum or SS tubing and fuel compatible hosing -do NOT use coolant hose.
There are various suppliers on line that deal with fuel hoses in straight or angled product. Here's a shot of mine....

[psmg]

I forgot to include the picture, sorry

[NAS1966]

Thank you for all the input - I have dismantled a junk car and am using the components - pics will follow. I just finished mocking up relocating the tank. Moved it into the center since I will have a duel exhaust system.