So...they've got us all beat...

Started by rubbinisracin, September 03, 2014, 01:30:34 PM

Previous topic - Next topic



88v8

If I had a diff like that, I wouldn't want to hide it under the car!

Dan B


Preform Resources

Man, this is serious as a heart attack !!
Dave

MGBV8

QuoteReminds me of my brother's B.

Yeah, on steroids!
Carl

RobertE

Been following this build for a while. Equally implausible as it is amazing.

A lot of ideas that I've seen discussed on this forum being used - such as the Lotus heads being used on the rover block. The twin turbo motor looks like it belongs in an 80's F1 car. 1000hp GT3 MGB? Yes please.

rficalora

Quote
QuoteReminds me of my brother's B.


Yeah, on steroids!


I was thinking it reminded me of a steroid infused MG version of Phil's Spitfire.

HealeyRick

Very impressive!  Going to be interesting to see how it handles the 'ring.

roverman

1,000 hp. RV8, I "might" consider a Coscast/Cosworth, block. I hope this doesn't go the way of the $1 mil., 70's Cuda, that was built to beat an "Enzo". It got too much lift at about 170 mph., without aero tricks. Likely to be the fastest RV8/907 headed motor-ever.  roverman.

classic conversions

Mmmmm I would prefer Jim S choice of engine and design. Much better chassis which high speed requires.

Spitfire 350

"I was thinking it reminded me of a steroid infused MG version of Phil's Spitfire."
Rob,
That front fender and flare interface and tack welding sure looks familiar to me. I must admit that these guys are going way beyond what I did, but it does give some credence to mine.
PhilMcConnell-10.jpg


Jim Stabe

Except for the grille and tail lights, not much recognizable MGB there. Nascar does a better job with brand identification than that.

MGBV8

What are you saying, Jim? Have we finally found the answer to THE question, "When does a MG cease to be an MG?"  ;)
Carl

tr8todd

Why not just throw a turbocharged LS7 into a Daytona prototype with an MG grill and deck lid.  Done.

rubbinisracin

That hood..... visibility has got to be greatly reduced

Jim Stabe

Well Carl, we may be looking at something that is on the far side of the demarcation line but we still don't have the precise location of the line. I'm still not sure on which side of the line my car sits.

BlownMGB-V8

Based on styling cues Jim, your car is still very much an MGB. Jason's car obviously pushes that line way out there, but it is still recognizable. So my opinion is that as long as the car can be recognized as having evolved from an MG, then it is in fact an MG, and likely as not CK would have been proud of it. Consider the factory Specials. Often they deviated at least this far.

I would base that line on several points: Is the OEM recognizable from the body lines, the trim, the character, or an aggregate of those and other related factors? If so, I think we claim it. Does it maintain the original vision in terms of what CK would have liked to have been able to build (and we do have adequate documentation thereon) given what is now availlable to us? And does it promote the image of the MG Marque in some way, be it competition, spirited driving, or even strictly appearance? Obviously here the full line must be considered includng pre-war cars and specials. We should also consider the owner's intent.

Then I say the ONLY time we exclude a car from our fraternity is when it has been taken so far from those considerations that not only does it have virtually no recognizable vestage of MG remaining, displays more stying cues of another very recognizable manufacturer and indeed would be far more likely to be recognized as such, is directed towards a segment of automobilia that CK would never have even considered, does not promote MG in any way and may even work in opposition thereto, and the owner has no desire for it to be seen as an MG or to include himself in the fraternity. Under those conditions and no others would I consider exclusion.

It is important to us as upholders of the original dream to stand united against the tide of Puritanicalism. CK was first and formost a converter, as are we all.

So I say, Jason, you are welcome here. Many of us could only wish we had the time, money, skills and other assets to indulge our fantasies in such a manner as you are very cleverly doing. So we do what we can, and proudly show our friends. Most of who are right here. And they stand by us, admiring what we have wrought, however simple it may be. To my mind, that, and the spirit of the driving experience is what we are all about.

Jim

MGBV8

"I'm still not sure on which side of the line my car sits."

Oh, you are most definitely still inside the line, Jim!

I have been daydreaming about a wider MGB for 12 years. Probably won't ever do it, so I get to live it thru yours. :) Been intrigued by the idea ever since I saw this MGA live & in person in Townsend, TN:

Carl

Jim Stabe

Carl, you should go for it, there are a lot easier ways to do it than what I did and you wouldn't need to widen it as much. I widened it enough to cover the Corvette suspension. Use a fiberglass rubber bumper for the front and widen it and split bumpers in back ala early 70's MGB, leave the front frame rails and engine compartment alone and use a bolt in front suspension, make a windshield like the MGA has. It would be easy to widen a steel hood by adding a strip in the middle and you could use the stock hinges. Leave the tunnel intact and just widen it and use the stock pedals. If you plan out the cuts in the rear you can just add a strip in the center of the rear wheel wells and get a nice big tub for large tires. It wouldn't be that difficult to do.

perrymgbv8

Jasons car is certainly way out there eh ?  I've been chatting to him for a good while now. I have as much admiration for him and his special car as he does for my junkyard dog drag MGB. Jays car has a modified MGB shell and it runs a modified Rover V8. Thats enough for me to agree that its a seriously Modified MGB :)