BOP/T5 clutch

Started by ex-tyke, February 02, 2013, 04:40:55 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

ex-tyke

February 02, 2013, 04:40:55 PM
SALE: McLeod 10" diaphragm style clutch for BOP/T5 xsmn (1.125" x 26spline). Has less than 10K miles use.
 $80 + actual shipping

Olds -McLeod clutch 1.jpg

Moderator

#1
February 02, 2013, 05:38:42 PM
Does that fit an old Buick 215 flywheel (with thick outer ring), or would someone need to buy a D&D (flat, Chevy bolt pattern) flywheel to go with it?
1971 MGB GT V8
Buick 215 w/ Rover heads, custom EFI & crank-fired ignition.
Custom front and rear coilover suspensions.

ex-tyke

#2
February 02, 2013, 07:06:16 PM
I believe you're correct on the flat flywheel. . For reference, the clutch mounting hole pattern has 3 sets of 2 holes at 3" spacing on a 11" bolt circle

MGBV8

#3
February 02, 2013, 08:42:27 PM
Or free delivery to Omaha.  ;)
Carl

ex-tyke

#4
February 02, 2013, 10:03:03 PM
QuoteOr free delivery to Omaha. ;)
That's a possibility.....
Print
Go Up Pages1
User actions