I wish I worked here....

Started by denvermgb, July 22, 2012, 10:39:29 AM

Previous topic - Next topic

denvermgb

After visiting western Colorado for many years, I finally visited Flyin' Miatas, where Keith Tanner works on Miatas and other cars.  Keith graciously gave me a tour and I was able to see his LS powered MGB GT.  What an awesome shop and Keith and his colleagues do incredible work!

http://www.flyinmiata.com/

If you are ever in Western Colorado seeing the national monument, or touring the many wineries or the local Dinosaur museums, or whitewater rafting, or skiing, or golfing (can you tell I am a little partial to Colorado?) you might contact Flyin' Miatas for a tour. Perhaps some of you guys coming out to Colorado  next year for the MGBV8 might consider a little vacation time in Western Colorado?

 A good friend of mine just picked up a low mileage '04 Mazdaspeed, and I will be helping him install some Flyin' Miata parts for a little extra "go."

Brad

Moderator

I'll have Keith's HIWD uploaded soon. In the meantime, you guys might enjoy reviewing this one:

<a href=""http://www.britishv8.org/Other/BillCardell.htm">Flyin' Miata's own Westfield SDV with Mazda 1.8L Turbo Engine</a>

1971 MGB GT V8
Buick 215 w/ Rover heads, custom EFI & crank-fired ignition.
Custom front and rear coilover suspensions.

Keith

It was good visiting with you, Brad. Anyone who's in the area is welcome to drop by. If you want to see the MG or the Westfield or any other particular car, give me a bit of advance warning so I can make sure to bring it in to the shop!

Keith

denvermgb

My next conversion will be an LS motor.

Brad