Wanted buick/rover 215 to MGB transmission adapter plate

[pgfkr]

looking for the transmission adapter plate that allows MGB transmission / bellhousing to mount to buick/rover v8.
I think there are some guys on the board that have one installed.
If anyone has one lying around I could purchase or could email me a dimensioned drawing I would be etternaly grateful.
Cheers
John.

[WedgeWorks1]

Last I heard and this was YEARS ago to put a MGB tranny on a rover you have to remove/cut off some parts of the rover block where the starter is......It is a ton of work and when your done you have outside of using the engine on a MGB tranny a useless engine for any other transmission.

[pgfkr]

Yes, I am aware of this  :-)

[psmg]

John,
  I have the complete setup. Adapter plate, proper flywheel, pressure plate, newly rebuilt MGC clutch disk, slave cylinder and starter. Let me know if you're interested.

Paul

[rfsmith48]

There is a guy in Denver/Aurora CO that had one of these setups. You  might try Denver Craigslist or the TR8 forums.

Rog
303 494 0140