Wanted : P76 block and Buick Stage II V6 parts

Started by roverman, September 05, 2011, 01:28:06 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

roverman

September 05, 2011, 01:28:06 PM
Hi, On the P76 block, bore/sleeves,not important. No cracked or worn out aluminum bores., no thrown rods. Need a Stage II,"on center"/ siamese bore block, gear drive and crank trigger ign., for same. Thanks, roverman.

Greg55_99

#1
October 14, 2011, 12:03:21 PM
Out of curiosity, what did you have in mind?

Greg

roverman

#2
October 14, 2011, 01:01:58 PM
Greg and clan, Before I considered "all" of the benefits of the late rover blocks, I was thinking the P76 for a 340/350 crank, possibly with TA heads. Stage II "on center" block is for a transverse, mid engine build. Cheers, roverman.

Greg55_99

#3
October 14, 2011, 04:36:39 PM
Ah.... I take it then, you've reconsidered this idea....

Greg

roverman

#4
October 17, 2011, 07:50:18 PM
Yes Greg, might I suggest to share on this forum ? Good Luck, roverman.
Print
Go Up Pages1
User actions