1970 Rover 3500 hood

Started by sarinas_dragons, March 17, 2011, 03:52:34 PM

Previous topic - Next topic

sarinas_dragons

Kenneth Quitiquit
11414 Ainsworth Ave S
Tacoma, WA 98444
206-200-7025

$500 or best offer

I have an aluminum hood off a 70 Rover.

dome light, hood scoops, wiper-washer nozzles, hinges, trim and v8 emblem all negotiable





(moderator corrected street address...)


sarinas_dragons

When I guess on what the value of parts might be I look at the availability. I interpreted the lack of parts incorrectly. It is not smart for me to hold on to parts, either.

I will consider any reasonable offer.

$400 for both or trades

I have the manifold and carb, and distributor, too. Package deal...

al mackenzie

Hello Kenneth
I am looking for the air filter from a US export ('Federal' or 'NADA') Rover 3500, importantly including the vacuum thingamybob on the 'snorkel' that rises to the underside of the bonnet and mates with the central scoop on the bonnet, ideally also incuding the dust cap on the underside, and the hoses for the bi-metallic thinamyjig inside the cannister. I also need the three 'special' bolts that secure the warm air collector metalwork to one exhaust manifold, and that manifold in turn to the cylinder head. If you are breaking one of these cars I am also looking for the four electric window motors and the quad switch panel in the centre console, and the padded panel on the tunnel between the two ashtrays. Can you help? Please don't hesitate to send an email to: al at mcknz dot de
Best regards from Berlin, Germany