LT 77 Trans to a94 rover 4.0

[corby1]

Help I'm going to change out my 3.5 to a 94 Rover 4.0 using the LT77.  Will the LT77 trans input shaft fit in the 4.0 crank? I've heard that the 4.0 crank is longer then the 3.5?(The input shaft goes in to far?) and how would have a bushing 4.0? Thanks

[roverman]

Todd, It is longer-on the front ! This to drive the crank driven oil pump. I know of no extra dim.-out back. roverman.