Flaming River Steering column for MGB

[accobraman50]

I had attached one photo of the new column and a close-up shot of each end, but some how they did not appear on my last post above.  I do not know why? What do I need to have photos appear on this Forum?

Off the shelf bushes would have made this project less time consuming, but I could not find anything that would fit the undersized .872" end. I tried a stock bush and press fit it into an undersized hole in the new stainless column, but the results were not what I found acceptable.  

The existing column is 1 1/4" OD and I wanted to keep it that size to fit everything else on the car.  I believe I have have a great solution now and it looks great too.

If I can figure out the photo thing, I'll edit my post and include them.

Arthur

[BlownMGB-V8]

Arthur,
Your problem is the file size. The smallest one is 640, max size allowed is 600. So they just don't fit. I just set my camera for the size that fits, that way I don't have to resize, which can be a pain.

It's a good looking steering column. Much nicer than the bulky things MGB's come with.