Fuel Injection for Rover 3.9

Started by Colin1944, June 09, 2009, 09:26:31 PM

Previous topic - Next topic

Colin1944

I have a complete fuel injection unit for a Rover V8.  This unit came off a 1991 Discovery 3.9.  The unit is completely restored to new condition.  The injectors are not new but have been serviced.  The wiring harness for the injectors was cut off when the unit was removed from the vehicle (butchers), but there is enough to splice into a main cable.  The throttle linkage and all ancilliaries are included.  I don't want much for it.  It cost me $20.00 per injector to have them serviced.  The unit has been completely disassembled, blasted with glass bead and all machined surfaces have been refinished. All bolts, washers and hardware to attach same to block have been replaced.  I will purchase and supply a new gasket set to be included.  I guess by the time I am finished I will have about $250.00 into it.....that is all I need to get back.  I am going to carburate my engine so all of this is of no use to me.  I just could'nt stand to throw it all in the garbage, hoping it will be of use to someone.
P1050610.jpg
P1050611.jpg
P1050615.jpg
P1050617.jpg
P1050621.jpg
The pictures do not show everything assembled.  I do not have the injectors back yet and the fuel rail has been refinished but not dry. The plenum and throttle linkage is still being assembled.  I will add pictures when the unit is complete.

I can be reached through my e-mail ( cking70161@aol.com ) or by land line at (905) 668-8467.  I am located about 30 miles east of Toronto, Ontario.  I will ship anywhere in North America at your cost.

Colin1944

BTW....none of the surfaces have been painted.  What you see in the pictures is either machined or bead blasted aluminium

Colin1944

Here is the finished unit, less wiring.  Good deal for $250.00 plus shipping:-)
P1050622.jpg
P1050623.jpg

Colin1944

I have been asked a few questions on this unit....here are the answers.

The unit includes:
- Most of the preformed hoses
- Fan Temp Switch
- Step Motor
- Coolant sensor
- Throttle potentiometer
 and this little goodie which I canot identify, but am sure it can off the unit....somewhere.
P1050627.jpg
P1050628.jpg

There is NO ECU!