Cad stroker crank for RV8 ?

[ag1234]

4,9L., last push rod motor.  Thrust on #3, 1 pc rear seal with 3.625" stroke. RJ 1.93", Mains 2.625.
                                                                      Happy Hot Rodding, Art.

[Airwreckc]

Hi Art, which RV8 are you suggesting this crank for?  Would it also work for the Buick 300?  In any case, what mods (if any) are needed?

[ag1234]

I am  hereby released of all liability.! You could borrow/rent a Cad crank, carefully lower into 300' Buick main journals,( without bearings). Cad 4.9L rods or Honda ?  Juggle foe 305" sbc pistons/ or ?
                                                                                           Good Luck,  Art.