British Leyland Factory 4 Barrel Intake?

[BlownMGB-V8]

Makes no difference Jay, the heads are the same. I think the angle is about 70 degrees IIRC.

Jim

[Dan Jones]

> They reckon this manifold is not made for The Rover standard Heads but for Buick 300 cubic inch Heads.

What size are the ports?  My Huffaker Rover intake ports measure 1 3/4" tall x 1" wide and are a good match for the Buick 300 heads.

Dan Jones

[rover sd1 v8]

HI Dan .The  ports are  1 3/4"  and 1" wide.  Yes i think  you are right  about the heads .

[bigaldart]

More than likely that manifold is BL marked as a homologation special for the factory cars. I believe any parts used in competition had to be marked a factory parts to be legal.

Alan

[3528sd1]

Hi Jay  I recognise this manifold back in the day it was a special development that never went ahead please message me through private email .I can give you more information on this manifold I was one of the designers. PS how did you come by this manifold they were dismantled they weren't supposed to be released to the public so please contact me thank you. Regards old timer

[MGBV8]

I can give you more information on this manifold I was one of the designers.

There are quite a few of us here that are interested in the history & any other info that you can provide about this mystery intake manifold.  Thanks!