Anyone put in an LSx into a TVR 2500M?

[vinax]

Has anyone here swapped or seen a swap of an LS1 into a TVR 2500M?

Any pictures / suggestions / ideas / problems faced?

These are some dimension I found on this site - http://www.chevroletls1.com/chevrolet_ls1_6_info.html

The Corvette LS1 engine measures approximately 25.25" long (Rover V8 is 27.5"), LS1 overall height is 24-25" (Rover V8 is 25.5" plus the carb and air filter or efi plenum, 29-30" or more), LS1 width across the cylinder heads is 20.5" (Rover V8 is 20"). With the T56 6 speed gearbox fitted the LS1 is some 3" shorter than a Rover V8 with a standard 5 speed gearbox.

[jellison]

SLOW M has. On here and PH.

I popped an LS6 in my Chim (sold now). http://www.freewebs.com/faster-tvr/

Jelly
http://www.pistonheads.com/gassing/profile.asp?memberId=7660

[slow_M]

Jelli, mine's a Ford 302 punched out to 331. Stainless_Steve on PH is doing this one-> http://www.pistonheads.com/gassing/topic.asp?h=0&f=13&t=755339&mid=79542&i=0&nmt=LS%20powered%20M&mid=79542

BH

[jellison]

Bernard - I was close

[slow_M]

Yes, you were. Pound for pound and horse for horse, very close.
One day, eight pots, no waiting.
For now, I wait.
For $.
B.