Slotted and drilled rotors. Yes or no!

Started by Brownwood, February 24, 2014, 02:39:45 PM

Previous topic - Next topic

DiDueColpi

Uhmmm,

I own a high end automotive repair shop. I also own a performance and race shop. We field 3 separate race teams all of which currently hold class records. We have built winning rally cars for Subaru, Suzuki and Volvo and raced them all over the world. I have an engineering degree and am a master technician for five separate OEMs.
But I guess I'm just blowing smoke out of my ass.
Agreed everyone has their opinion.
But before this turns into a brawl I think that we should just drop it.

Cheers
Fred

88v8

Moss do a dotted & slotted rotor for the TR6. I expect there is something similar available for the MG.
Yes, here we go:
http://www.moss-europe.co.uk/Shop/ViewProducts.aspx?PlateIndexID=308&SortOrder=1

I assume the dotting is less of a stress-raiser than cross-drilling.

Ivor

kstevusa

We've discussed most of the choices available today.  It seems 1/2  of the forum is drill/slotted and the other 1/2 is "BIG Brakes"  I was semi confused by all the data until I reviewed the "Hail The Mighty B Cam Video" again.  The answer is evident.  The "B Cam"  will compensate of inadequate rotors and calipers as well as reduce vacuum to negate the effect of brake being too large. Seems strange we all missed the obvious .  SAFETY FASTER!    LMAO.

avbates

My Dodge Viper ACR has slotted rotors and there is nothing on this car unless there is a functional benefit.

StopTech two-piece, slotted, lightweight rotors combine with Brembo calipers to reduce rotating inertia and unsprung mass, improve brake cooling, and significantly reduce fade even under extreme conditions. The StopTech rotors feature a patented curved-fin design, a key element in improving brake cooling.  The Dodge SRT10 Viper ACR stops from 60 mph in less than 100 feet.
large_07.jpg

BlownMGB-V8

I have a set of scalloped ventilated 6-1/2 lb rotors that will go on my car. Latest and greatest thing, better than slotted, drilled, or non-slotted non-drilled. The scallops reduce weight considerably while also allowing outgassing of the pads and removal of debris if needed. Cooling characteristics are infinitely superior to all other types of any sort when supplemented by the "B" cam. Did I mention they are light? With aluminum hats they weight a good bit less than the stock MGB rotor.

Jim

Dan B

Just put your feet down like Fred Flintstone.