triumph tr7 headers?

aguitarhero · December 08, 2013, 12:46:06 AM

I have a 77 triumph tr7 with a sbc 385. Im looking for advice on what headers will work with this. Anyone have experience with this or know anyone who did it. Any info would be appreciated!

aguitarhero · December 08, 2013, 05:19:36 AM

-- moved topic --

WedgeWorks1 · December 08, 2013, 09:51:41 AM

There are not headers made for the conversion. All the ones I ave seen have been typical cast manifolds with the center drop.

aguitarhero · December 08, 2013, 10:28:38 AM

I know they dont make them i was meaning if any headers for different apps. Would fit .

WedgeWorks1 · December 08, 2013, 05:07:32 PM

Well for the passenger side it's any manifold will work and the drivers side is best for on the dumps towards the rear to clear the steering column.

aguitarhero · December 08, 2013, 08:06:10 PM

Well im not gona use an exhaust manifold. This motor is making over 500 hp. It will kill my motor. There has to be headers thst Will work.

WedgeWorks1 · December 08, 2013, 09:37:11 PM

Best bet is to get a header kit and make them fit. Then you will need to do frame connectors and reinforce all the suspension pickup points! That kind of HP will tear a TR7 apart,