TR7 V6 2bbl air cleaner

Started by BlownMGB-V8, May 04, 2013, 07:48:38 PM

Previous topic - Next topic

BlownMGB-V8

Here is the hat I made to use a low restriction cone type air cleaner instead of the 'firestarter' triangular foam element filter. The tube was excess stock leftover from Dan's TR4-EFI system and the hat was hand formed from sheet aluminum.

Jim

MVC-212F.JPG

MVC-213F.JPG

The car is slated to go off to serve duty as teenager transportation and should do quite well at that task.

Dan B


BlownMGB-V8

I thought it came out pretty good. Plenty of clearance for the fresh air plenum, a decent low restriction filter, it clears the hood and it's shiny. With a little work it could probably be polished up even better.

Jim

BlownMGB-V8

It seems to like the new air cleaner. I took the car out today and it felt rather peppy. I think this is going to work out real well, and is a good match (2bbl) for a car with an automatic.

Jim