My Last Word On Wheels, I Hope!

Started by pspeaks, March 31, 2013, 01:19:39 PM

Previous topic - Next topic

mstemp

Paul,

Those are the wheels I am running but 16x7 with 38 mm offset. Using a 3/8" spacer as I mentioned before. Sml stands for silver with a machined lip.

pspeaks

Thanks guys, I think that's the way to go!  I'll see if I get any emails from them tomorrow.  I have commitments most of the day tomorrow so I can't order them until Tuesday anyway.  Mike, a couple of questions, do you have stock MG suspinion and no flares, did you have any trouble getting lug nuts, are there plugs for the holes you don't use, and did you have to change the wheel studs for longer ones?  And one last question.  Do you get less clearance with 16's or is the tire sidewall just shorter and stiffer.  I'm open to the idea of 16 if it doesn't present a problem?


Paul

mstemp

Paul,

My car has leaf springs with lowering blocks, sits at 13.5" from wheel center to chrome strip. Slight rub on outside lip on big bumps. Could use slightly less spacer than the 3/8" I have now. This is all based on my tires, 205/55/16, and stock fenders with no mods. If I rolled my outside lip would help but affraid I would crack the paint as mgb metal is stiffer than modern cars. One reason to stay 15" is tire stiffness as my ride is plenty harsh on my local roads (poor).
Yes I needed longer studs and small head nuts.my wheels only have 4 holes, not 8 like some of the multi fitment wheels so no silly looking empty lug holes.
One issue is if you have a stock mg diff as the center caps will not fit due to the axle nut that protrudes.

pspeaks

Mike, where did you get your studs and lug nuts?

mstemp

Paul,

Been awhile since I did those. Got the studs from Summit and I think they were these:
http://www.summitracing.com/parts/arp-100-7708/overview/

You will have to check the knurl diam to be sure as I no longer have the invoice. I went with these front and rear and yes they were changed to metric as they had the correct length and diam for teh rear. Had to shorten them on the front.

Lugs nuts I got were gorila tuner acorn seat, discount tire should have them depending what you use for studs.

pspeaks

Thanks Mike, I'll have to figure out what to do about the center caps, but thanks to you I think I've got a handle on it.  I was going by a picture I saw on their webpage but I have an email into them about 4 stud holes rather than 8.


Paul

mstemp

Paul,

Biggest thing to consider is the tire overall width. My 205/55/16 come in at 8.4" and its pushing it. Also the stock diff is offset so the LHS rubs more than the RHS.

pspeaks

I haven't measured my GT's differential offset yet but every MG I've ever owned has had that problem.  I had planned to use 205,50R15 tires, roll the fender lips, and use a panhard bar.  The car needs a new paint job which I've been putting off to use the money on parts but in the distant future I may flare the fenders, just not right now.


Paul

pspeaks

Just went out and measured my GT.  The rear axle is to the left ¼" which seems to be less than what I'm hearing from most of you guys but still, it's off.  I don't like saying this because it's not the best way to do it, but would it be too dumb an idea to use different thickness wheel spacers to equal the tire clearance or a ¼" spacer on one side and none on other?  If and when I put a Ford rear end under it I'll correct this.

Just got an email from Gabriel at Voxx Wheels: the MG-3 is a single drilled wheel so none ot that multi-fit look.  I'll be ordering them in the next day or two.





Paul

pspeaks

Some of you may already know about this site but I just found out.  For just about anything to do with what you're looking for in the way of wheels and many other things, check-out this site.

http://www.gorilla-auto.com/


Paul

Moderator

For lug nuts, I'd highly recommend McGard's 64000 series. Made in U.S.A. and available through many of the popular catalogs: http://www.mcgard.com/
1971 MGB GT V8
Buick 215 w/ Rover heads, custom EFI & crank-fired ignition.
Custom front and rear coilover suspensions.

pspeaks

OK. I guess this will be the final word.  After numerous emails between myself and Voxx customer service to get details I went to Discount Tire, my local distributor, and placed an order; an hour later I got a call from Discount.  When they called Voxx they were told there is no way a 38mm offset can be installed on an MG and the use of spacers are too dangerous and they don't recommend them and refused to ship the wheels.  When Discount tried to explain this was a rather modified MG and not stock, they refused to discuss it.  You guys do what you want, but for me I'll not do business with Voxx in the future.  Discount said to come back in and they would find me a set of wheels at a discount.  They were very nice and was shocked at Voxx and there condescending attitude.

Paul

MGBV8

When you speak to a representative on the phone, you never know if you are going to get a knowledgeable person or not. In you case, Paul .... NOT.  Discount Tire spoke to the wrong person.

Using the calculator below, plug in a 5" wide wheel with 22mm offset (stock late rostyle). Compare it with your wheel of choice, 7" wide with 38mm offset. We are talking about a wheel that will protrude 9mm more than stock.  My wheels are out farther than that, but I dealt with the fender lip & installed panhard rod.

I spent nearly 6 months trying to find a wheel for my MG about 22 years ago. Had zero luck until I quit telling them what kind of car I wanted to put them on.  I just did all my own measuring & researching and then ordered what I could find that fit.

http://kgm.tiwing.com/calcs/offsetcalc.htm
Carl

BlownMGB-V8

I concur. Can you imagine the reactions when saying I wanted 11 x 17- 5 lugs for the rear of an MGB? Same with tires. Even after ordering the tires the seller called to try talking me out of it.

Jim

mstemp

Paul,

Why not just tell them they are for what ever they show in thier book?

pspeaks

I just talked to Hap Waldrop at Acme Speed Shop and he has exactly what I need, so I think I'll order a set of wheels from him.  He has them with a 25mm offset (3mm from stock) which is way better for what I'm doing than 38mm (which would be 16mm off); and if I need to use a spacer Dave Patton at Suto Fab has 4 on 114.3.  Hap thought 15X6 would be better, but I still plan on 7" wheels so the tires won't look pinched.

Paul

MGBV8

You can't compare the offsets like that, Paul. Just subtracting the offsets from stock doesn't take in account the extra wheel width.

Use the calculator before you order wheels!

http://kgm.tiwing.com/calcs/offsetcalc.htm

Hap doesn't sell a 15X7 with the offset you really want.
Carl

pspeaks

Carl, I looked at the chart [kgm.tiwing.com] but appearantly don't know how to use it; I'm a tad confused now.  I've already ordered the wheels and can try to call tomorrow and change the order but it's probably too late and it looks like I'm out a lot of money   If Hap, with all his MG expierence,  doesn't sell a wheel with the offset I need, what do I need?  I know the wheel is 1/2" wider each way If 22 is stock and 25 is 1/8" shouldn't a spacer bring it back to where I need it to be?  What offset do I need? When I started this I was told to go with a 15X7 wheel, a lot of other people have and it worked, should I have gone with a 6" wheel? .  I've built a lot of cars over the years but this is the most frustrating thing I've delt with. If this goes south on me I'm going to park the car in the back yard, grow my beard back, and go back to my Harley :-)



Paul

pspeaks

OK, I talked to Hap and stopped the order, it wasn't too late. I took another look at the chart and I think I understand what Carl is saying "Thanks Carl".  As my car is a street car and I'm too old to do any racing or lap work I think I'll follow what Bryan Jourbarts did.  He has a beautiful MGB Roadster (picture attached, I hope he doesn't mine).  If they fit his car with no modifications, they should fit mine; however, this does NOT mean I won't grow my beard and ride my Harley this summer :-)


Paul
Bryan_Jourbarts_MGB[1].jpg

Moderator

1971 MGB GT V8
Buick 215 w/ Rover heads, custom EFI & crank-fired ignition.
Custom front and rear coilover suspensions.

MGBV8

Glad you didn't get those 15X7s. What you just about ordered could not have been fixed with spacers, because they were going to be too far out already.

I believe Hap does have a VTO 15X6 that will work. The six inch width is fine if you plan to run a 195 or 205 tire.
Carl

pspeaks

They're VTO, which are exactly like Panasport or look like them anyway, just a little less expensive, not much, just a little and they come with the MG center caps.  Hap talked me into 15X6, same as Bryan, which he's out of but will have a new shipment in a couple of weeks.  He recommends putting 195/50R15's on it, again like Bryan.  I have 195 Michelin's on it now and they don't look like rubber bands; 205's aren't that much wider and shouldn't be a problem either.  I'm giving some serious consideration to BFGoodrich g-Force Sport Comp-2 tires, undecided on 195 or 205, but that's today, who knows, tomorrow I might like something else.  I guess that's the beauty of having a project that's never finished, I've been putting parts on this GT for 35 years and a roadster before that.  Now all I have to do is get in touch with Bryan and find out what that color is and where he got it :-)


Paul

NCtim

Quotehowever, this does NOT mean I won't grow my beard and ride my Harley this summer :-)

Summer on a Harley in Texas . . . as a Texas boy I love it, I don't miss it. You should do it, though. Don't neglect the things that make you happy.

Cheers,
Tim

pspeaks

Thanks Tim.  It's hard to avoid the occasional sunburn, but my buddies and I do night rides when we can.  I'm getting a little old for it and may have to go to a 3-wheeler soon but I love riding.


Paul
006.JPG

britcars

{Thanks Tim. It's hard to avoid the occasional sunburn, but my buddies and I do night rides when we can. I'm getting a little old for it and may have to go to a 3-wheeler soon but I love riding.}
Paul:
Saw this system on a Gold Wing in Alaska a couple of years ago. The guy had a scabbard for his crutches and had rigged an air shifter.
http://trikealternatives.com/retractatrike/