BritishV8 Forum

General Category => Classified Ads: Swap Parts Here! => Topic started by: BlownMGB-V8 on April 08, 2025, 10:40:35 AM

Title: Wanted: basket case bug eye
Post by: BlownMGB-V8 on April 08, 2025, 10:40:35 AM
Can have significant damage to front and rear. Does not need to run. Prefer acceptable interior, minimal rust. Proximity to Cincinnati a plus.

Jim
Title: Re: Wanted: basket case bug eye
Post by: MGBV8 on April 09, 2025, 08:44:14 AM
Why a Bugeye?  Aren't the Midgets the same size?

I would think a Midget would be easier/quicker to find & much more economical for your project (to fit in your bus?).
Title: Re: Wanted: basket case bug eye
Post by: BlownMGB-V8 on April 10, 2025, 08:49:42 AM
The Bugeye is an inch or two narrower actually. It's still a bit wide and I am going to try to do some more measuring today. But at least it is a possibility. I expect there are more of them around than Crosley Hotshots, the other candidate. Numerous changes would be required which is why the basket case. I think it is a little lighter than the Midget. I like the looks of the Bugeye better as well.

Jim
Title: Re: Wanted: basket case bug eye
Post by: MGBV8 on April 10, 2025, 09:25:44 AM
The Bugeye looks better with damaged front & rear?  :D

AH Sprite Width: MK1 (Bugeye) and Mk II 53.0 inches, MK III and MK IV 55 inches

MG Midget Width:   Mk I and II 54 inches, Mk III and 1500 55 inches

AHBugeyeDimensions.jpg