Text only | Text with Images

BritishV8 Forum

General Category => Engine, Transmission, & Rear Axle assy. => Topic started by: ag1234 on October 15, 2024, 08:58:09 PM

Title: Ford and GM 7.5" Diffs
Post by: ag1234 on October 15, 2024, 08:58:09 PM
Just wondering, any parts interchange ? Related to Dana 30 ?
                                                                           Thanks, Art.
Title: Re: Ford and GM 7.5" Diffs
Post by: mgb260 on October 16, 2024, 11:00:58 AM
Art, the 7.5 GM has 26 splines vs 28 for Ford 7.5 and 7.65 GM.
Title: Re: Ford and GM 7.5" Diffs
Post by: ag1234 on October 18, 2024, 04:34:16 PM
Considering a 7.5 GM carrier into 7.5" Ford case. Likely machining required. JH bound.
                                                                                                         Thanks,, Art.
Title: Re: Ford and GM 7.5" Diffs
Post by: MGBV8 on October 18, 2024, 05:47:53 PM
What is the advantage, Art?
Title: Re: Ford and GM 7.5" Diffs
Post by: BlownMGB-V8 on October 19, 2024, 12:13:34 PM
Won't be as durable as the stock R&P.

Jim
Title: Re: Ford and GM 7.5" Diffs
Post by: ag1234 on October 22, 2024, 01:57:59 PM
Carl, I haven't got into the Ford yet. I like 28 spline axles, maybe no C-clips ?  Have a Gleason for Ford.  Either is stronger than the JH, which has no posi available.
                                                                                      Cheers,  Art.
Text only | Text with Images