BritishV8 Forum

General Category => MG Sports Cars => Topic started by: mgrv8 on May 23, 2022, 02:35:14 PM

Title: COOLING FOR ROVER V8
Post by: mgrv8 on May 23, 2022, 02:35:14 PM
In Alaska I have a 79 "B" with Rover V8.  Looking to change radiator.  Is there an aluminum rad available without having
to buy a spendy custom made one?   I just heard today that a Chinese firm makes every radiator ever conceived(??)
Any help finding a new rad would be greatly appreciated.
Title: Re: COOLING FOR ROVER V8
Post by: mstemp on May 24, 2022, 01:03:33 AM
65 Mustang.
Title: Re: COOLING FOR ROVER V8
Post by: bfc on June 02, 2022, 10:43:45 AM
Mike is correct. the early Mustang V8 radiator is the best choice. I found that I had to trim some of the stock mounting rail from the front sides of the radiator and add in a wider piece along each side on the rear, top half of the Mustang radiator, but it is a near perfect fit. It hangs pretty low, so make sure to check clearance between your puller fan (if equipped) and the anti-sway bar.

That said, temps in Alaska may be mild enough that you can simply use the stock 77-80 MGB radiator, which is identical to the factory V8 radiator, if I recall.