BritishV8 Forum

General Category => Classified Ads: Swap Parts Here! => Topic started by: Shanto on April 14, 2020, 01:16:02 PM

Title: SOLD - 300 ci buick 215
Post by: Shanto on April 14, 2020, 01:16:02 PM
i originally built this engine for my 62 volvo but it consumed coolant. i believe the culprit is a cracked cylinder liner, but have not taken apart engine yet to confirm. i went with a ls swap and now i have no need for this engine.

1964 300 heads. milled, ported, dual springs, viton seals, bronze liners. - $300
ARP head studs - $80
1964 4 barrel intake manifold. idk why but it has 3/8 helicoils in it. - $200
buick 300 cast exhaust manifolds. great condition no cracks - $200
buick 350 hei . 10mm wires - $80
rotating assembly - 300 crank, silvolite +20 305 pistons, sbc rods - $100
sleeved block with timing cover. enlarged oil ports, 5/8 pickup. and short 300 water pump probably needs 1 new liner - $100
crower 50230 cam with lifters and dual roller timing chain - $150
fabricated aluminum oil pan - $150
300 crank pulley - $50
300 thick flywheel and new hybrid organic/ceramic clutch. just resurfaced - $100
alternator setup with brackets - $50
modified starter - $50
215 4 speed bellhousing. the super rare one that works with all the good trans - $200
edelbrock 1405 carb and phenolic spacer- fresh rebuilt and modified for 3/8 studs. and fuel pressure regulator -$150
valve covers - $50

or take it all for $1200

thats about it. located in pasadena CA. willing to ship the smaller stuff, but the bigger things id prefer local pickup.
message me with any questions.
willing to negotiate. make me an offer i cant refuse!

5.jpg
11.jpg
13.jpg
10.jpg
2.jpg
1.jpg
Title: Re: parting out 300 ci buick 215
Post by: Moderator on April 14, 2020, 01:21:52 PM
Please elaborate on what's modified about the starter.
Title: Re: parting out 300 ci buick 215
Post by: Shanto on April 14, 2020, 01:39:05 PM
its a delco 1107266.
originally for the 215 engine.
but has additional tabs welded on and new holes drilled to correctly engage the 300 flywheel.
14.jpg
15.jpeg
16.jpeg
17.jpeg
Title: Re: parting out 300 ci buick 215
Post by: Moderator on April 14, 2020, 07:04:54 PM
Very cool. Thanks for the pictures.
Title: Re: parting out 300 ci buick 215
Post by: Zack_008 on April 15, 2020, 12:45:09 AM
I'll take the bellhousing if you're willing to ship to 97233.

Thanks,
Zack
Title: Re: parting out 300 ci buick 215
Post by: tr8todd on April 15, 2020, 07:15:46 AM
I will take the heads for $300plus shipping costs if you're willing to ship across the country.  02330  I will send a PM with email
Title: Re: parting out 300 ci buick 215
Post by: blue4 on April 21, 2020, 09:36:53 PM
I would like to know if the heads are sold, if not I would like to purchase.
Thanks Bill
Title: Re: parting out 300 ci buick 215
Post by: blue4 on April 23, 2020, 03:27:05 PM
I am inquiring about the 300 heads are they sold?
Title: Re: parting out 300 ci buick 215
Post by: Shanto on April 24, 2020, 02:40:31 PM
SOLD the entire thing yesterday. thanks guys!