Print Page - Brake master cylinder size

Title: Brake master cylinder size
Post by: danielruhe on March 10, 2020, 06:43:05 PM

I am curious what I should use as a master cylinder bore size. Im fitting a Wilwood's pedal assembly with dual brake master cylinders in my conversion. I have Wilwood 4 piston brakes front and rear. and I have a 7/8 bore slave cylinder for the t5. What master cylinder bore size should I used for the brakes (one for front and one for rear) and for the slave? I also want to keep it all manual brakes.

Title: Re: Brake master cylinder size
Post by: billymgb1000 on March 10, 2020, 09:28:52 PM

Hello Daniel, I would check with who ever you bought the calipers from. They should have an idea. Good luck and keep us informed on how you do.
Bill G

Title: Re: Brake master cylinder size
Post by: rficalora on March 10, 2020, 10:09:16 PM

Agree Wilwood tech should be able to advise. They may want to know the vehicle weight. For reference, my car with about 12 gallons of gas is 2419 lbs.

Title: Re: Brake master cylinder size
Post by: danielruhe on March 11, 2020, 04:21:49 AM

Ok guys will do! I think Wilwood's most likely will be the best resource.

BritishV8 Forum

General Category => MG Sports Cars => Topic started by: danielruhe on March 10, 2020, 06:43:05 PM