BritishV8 Forum

General Category => Engine, Transmission, & Rear Axle assy. => Topic started by: minorv8 on January 21, 2020, 03:14:28 PM

Title: Nice carb setup
Post by: minorv8 on January 21, 2020, 03:14:28 PM
Crossflowintake_1.jpg
Crossflowintake_2.jpg
Title: Re: Nice carb setup
Post by: 88v8 on January 22, 2020, 04:47:37 AM
Yes.

Quads... at one time I was going to fit SU quads to my 215, but the setup got broken in transit from France. And I subsequently read that the quad SU setup for the RV8 had to have different needles in each carb due to the characteristics of the boxer manifold. And was in any case not suitable for the road because it was overchoked, so one way and another I may have avoided a load of problems.

Having said that, this chap is building quads into a Riley, so, a road car.
https://www.youtube.com/watch?v=9K2N-as4StE

As an aside, you may have seen this page of weird and wonderful fuelling developments for the RV8
http://www.mez.co.uk/ms12-new.html
British V8 gets a mention, and then there is an interesting write-up by the maker of the quad SU manifold.

Ivor
Title: Re: Nice carb setup
Post by: minorv8 on January 22, 2020, 03:35:48 PM
I took these photos at Barber Motorsport Museum in Alabama. This was an old Lotus that got converted to 215 power. I guess it was underpowered with factory engine. Looked like it was an Oldsmobile motor. Couldn“t say for sure, too much carburation on top of the motor.
Title: Re: Nice carb setup
Post by: MGBV8 on January 23, 2020, 09:07:51 AM
That 2nd pic definitely looks to be Olds 215.