Print Page - Cam timing with hydraulic tappets ?

Title: Cam timing with hydraulic tappets ?
Post by: pierre.louys on January 14, 2020, 12:34:02 PM

Hello everybody,

Is it possible to accurately measure a rover V8 cam timing (IO IC EO EC, maximum lift, etc) knowing the fact that the engine is on hydraulic tappets ?

Many thanks for you expertise,
Pierre

Title: Re: Cam timing with hydraulic tappets ?
Post by: 88v8 on January 20, 2020, 05:09:38 AM

Hello and welcome.

Are you trying to find the specification of your cam?

To measure the cam, one has to remove a lifter and put a measuring rod down the lifter bore. As you imply, one cannot measure with no pressure in the lifters.
Here is a readymade setup to do the job https://pitstopusa.com/c-134525-tools-equipment-engine-tools-camshaft-tools-cam-checking-tools.html

Ivor

BritishV8 Forum

General Category => Engine, Transmission, & Rear Axle assy. => Topic started by: pierre.louys on January 14, 2020, 12:34:02 PM