Text only | Text with Images

BritishV8 Forum

General Category => Engine, Transmission, & Rear Axle assy. => Topic started by: RDMG on December 18, 2019, 05:23:28 PM

Title: Best Rover/Buick Rocker Assembly?
Post by: RDMG on December 18, 2019, 05:23:28 PM
I have a set of factory rocker arm assemblies off a set of 1964 Buick 300 v8 heads, and a set off a set of 1999 LR Discover 4.0L v8 heads.

I need to use one or the other on my RV8 with ported 300 heads.

It looks like the rover set is a bit "beefier."  

Is there a difference?  Any recommendations either way?
Title: Re: Best Rover/Buick Rocker Assembly?
Post by: mgb260 on December 18, 2019, 06:18:56 PM
They are all similar.  I'm going to adapt the later 3400 V6 rockers with roller fulcrum when I retire in about a month. Will need to oil through the pushrods.


3.4v6.jpg
Text only | Text with Images