BritishV8 Forum

General Category => MG Sports Cars => Topic started by: danielruhe on December 11, 2019, 08:26:46 PM

Title: Mgb chassis strengthening ideas
Post by: danielruhe on December 11, 2019, 08:26:46 PM
Does anyone have any ideas for structural strengthening when doing a v8 conversion? I am putting a very well build 302 into a 74 roadster, and I just want to make sure the unibody is up to handle the 375-400 hp I will be putting in the car.  The last thing I ever want to worry about in the car is completing the project and end up with a twisted frame.  I have already bought upgraded suspension/drivetrain components (fast cars ifs/cce 4 link rear/ford8.8 etc.).  I also have already repaired any rust and added rear subframe connectors from mid frame to the front leaf spring perches now going to be used for the 4 link setup.  I plan on making this car a very nice street car, but also be able to drive it very hard reliably, and potentially take it to a track. Any suggestions would be greatly appreciated!
Title: Re: Mgb chassis strengthening ideas
Post by: mgb260 on December 11, 2019, 09:10:37 PM
I like what Geoff did in his build thread:

http://forum.britishv8.org/read.php?13,20349
Title: Re: Mgb chassis strengthening ideas
Post by: rficalora on December 12, 2019, 04:13:25 PM
QuoteI am putting a very well build 302 into a 74 roadster, and I just want to make sure the unibody is up to handle the 375-400 hp I will be putting in the car.

That's a pretty stout 302 if that's RWHP.  Would love to hear what you're doing to get that.
Title: Re: Mgb chassis strengthening ideas
Post by: danielruhe on December 12, 2019, 08:47:57 PM
That is the crank horsepower, haven't built the car yet so yet to put it on a dyno to test rwhp. It is a custom built roller engine with a custom cam AFR heads and lot of other goodies, also might add a nitrous system for the fun of it to get maybe 500 or high 400's.
Title: Re: Mgb chassis strengthening ideas
Post by: MGBV8 on December 15, 2019, 12:25:56 PM
The MGB is a fairly stout unibody.  What you have already done will go a long ways to making it even stronger.  I also like the additional front outriggers in the link by Jim N.  Someone else did that mod many years ago (can't remember who).  A roll cage will do the most.

More ideas.

http://www.britishv8.org/Articles/BritishMotorHeritage-Competition.htm