Text only | Text with Images

BritishV8 Forum

General Category => Steering, Suspension, & Brakes => Topic started by: WernerVC on September 18, 2019, 10:42:24 PM

Title: master cylinder rebuild
Post by: WernerVC on September 18, 2019, 10:42:24 PM
I want to rebuild my 1977 RB master cylinder but found out it has an overbored cylinder. My question is , where can I find oversized seals ? The ones from Moss didn't fit.
Werner
Title: Re: master cylinder rebuild
Post by: DiDueColpi on September 18, 2020, 09:42:32 PM
Get it sleeved Werner. Any competent machine shop can sleeve it in stainless.
And you'll live happily ever after.
Cheers
Fred
Title: Re: master cylinder rebuild
Post by: mgb260 on September 18, 2020, 10:21:41 PM
Werner, I sent you a PM. Fred, Good to have you back!
Text only | Text with Images