Text only | Text with Images

BritishV8 Forum

General Category => Classified Ads: Swap Parts Here! => Topic started by: gonzosal on September 12, 2019, 01:57:52 PM

Title: SOLD - Offenhauser 360 intake manifold-3.5/215
Post by: gonzosal on September 12, 2019, 01:57:52 PM
Intake manifold and square bore adapter plate. $150+shipping.
Offy.jpg
Title: Re: Offenhauser 360 intake manifold-3.5/215
Post by: mogdriver on September 17, 2019, 09:46:39 PM
Hi Sal - this is what's called the "low rise" manifold and will fit my 3.5L Rover, yes?  Where are you located?  Thanks, David
Title: Re: Offenhauser 360 intake manifold-3.5/215
Post by: ultrabluea9x on August 26, 2021, 03:35:48 AM
did you sell the manifold?
Title: Re: Offenhauser 360 intake manifold-3.5/215
Post by: gonzosal on August 30, 2021, 05:06:34 PM
Yes I still have this manifold. As well as a Holley 390 that will sit on top of it. You would have to clearance your hood in an MGB.
Title: Re: Offenhauser 360 intake manifold-3.5/215
Post by: roverman on August 31, 2021, 07:58:50 PM
FWIW., the Offy is lower than oem. 4BBL.  Art.
Title: Re: Offenhauser 360 intake manifold-3.5/215
Post by: MGBV8 on September 01, 2021, 09:26:08 AM
I am with Art.  It should be doable to get it all under the bonnet.
Title: Re: Offenhauser 360 intake manifold-3.5/215
Post by: BlownMGB-V8 on September 01, 2021, 09:35:00 AM
We've seen a Buick 300 go under the bonnet of a '69 without undue effort. A 215 shouldn't be a problem.

Jim
Title: Re: Offenhauser 360 intake manifold-3.5/215
Post by: gonzosal on September 08, 2021, 06:40:44 PM
Unfortunately the spacer plate adds another 1/2" to the stack height. I could probably have used it since I do have one of Dave Craddock's hoods on my car but I decided to go with the OEM manifold and an Edelbrock 500.

Jim,
The 300 in a 69 GT is my next project. With a 200R4.
sal
Title: Re: Offenhauser 360 intake manifold-3.5/215
Post by: ultrabluea9x on September 17, 2021, 03:37:45 AM
hi Sal would you post to Australia via ups ?
Title: Re: Offenhauser 360 intake manifold-3.5/215
Post by: Snoman on September 20, 2021, 06:01:08 PM
Hi Sal,
    I'm interested if you still have this. Where are you located and it would fit my early 3.9 with a  distributor?

   Thanks, Dan
Title: Re: Offenhauser 360 intake manifold-3.5/215
Post by: ultrabluea9x on September 20, 2021, 06:30:31 PM
Hi sal is the 445 just for the freight charges
Title: Re: Offenhauser 360 intake manifold-3.5/215
Post by: gonzosal on September 24, 2021, 11:52:45 AM
Manifold is sold. Still have a rebuilt Holley 390cfm for sale.
Text only | Text with Images