have a Buick 215 V8 just picked up from the machine shop. Block was bored to .030 and finish honed. Decked, new cam bearings, soft plugs replaced. Alignment checked. Heads were milled, 3 angle valve grind, new POS seals with new springs. Crank was magged and ground .010/.010. New pistons on resized rods. Block, heads, crank, pistons & rods: $1750.00. Located in SE Michigan. Contact with questions. Can furnish photos.
Interested in engine. My phone 330-507-2878. Mark
Hello
Do you still have this engine?
Jim