Print Page - Wanted 215 Buick 2 speed, sheet metal

Title: Wanted 215 Buick 2 speed, sheet metal
Post by: roverman on October 31, 2018, 04:21:30 PM

This is the sheet metal piece that fits between the block and the "baby Dynaflow".
Thanks, Art.

Title: Re: Wanted 215 Buick 2 speed, sheet metal
Post by: spridget on November 02, 2018, 07:27:19 AM

I have a 63 215 that was an auto. I don't remember seeing that part but I will look. Did the 300 with auto have the same part?

Title: Re: Wanted 215 Buick 2 speed, sheet metal
Post by: tr8 on November 02, 2018, 09:20:10 AM

just saw this
215.JPG

Title: Re: Wanted 215 Buick 2 speed, sheet metal
Post by: MGBV8 on November 02, 2018, 10:26:42 AM

I am not clear what you need, Art. Only sheet metal I am aware of is the pan with cooling fins that bolts to the bottom like a flywheel/flexplate cover.

Title: Re: Wanted 215 Buick 2 speed, sheet metal
Post by: ex-tyke on November 02, 2018, 06:36:22 PM

Exhaust heat shield?

Title: Re: Wanted 215 Buick 2 speed, sheet metal
Post by: roverman on November 21, 2018, 04:38:46 PM

"Between block and mounting face of Dual Path auto". Bill G. 61'-63' only. 300 is different, as in 2 rabbit ears at top.

Title: Re: Wanted 215 Buick 2 speed, sheet metal
Post by: spridget on November 22, 2018, 07:00:00 AM

I looked and the 215 is missing the part you are looking for.

BritishV8 Forum

General Category => Classified Ads: Swap Parts Here! => Topic started by: roverman on October 31, 2018, 04:21:30 PM