Print Page - lucas three position switch

Title: lucas three position switch
Post by: maxwedge5281 on August 15, 2018, 10:29:51 AM

with the help of this forum I installed two speed wipers into my 1959 bn6 healey. currently I use a on-off-on toggle switch that does not match the usual healey dash. does lucas make a switch that would use the original wiper slip on pull handle? any help is appreciated. it is the toggle switch lower left corner of the dash....looking for a switch that will use the same type pull as directly above it.
Resized_20180815_1014431790.jpeg

Title: Re: lucas three position switch
Post by: ex-tyke on August 15, 2018, 06:43:28 PM

There are 3 position Lucas pull switches out there...typically used for headlights.
https://www.autoelectricalspares.co.uk/lucas-spb364-push-pull-light-switch-3-position-off-on-on-2509-p.asp

Lucas3posswitch.JPG

Title: Re: lucas three position switch
Post by: Dan B on August 16, 2018, 10:59:38 AM

Off, Dim and Flicker positions. But seriously, it looks like Vicky has it. http://www.victoriabritish.com/icatalog/csc/full.aspx?Page=63

Title: Re: lucas three position switch
Post by: MGBV8 on August 16, 2018, 12:15:51 PM

Moss Motors early B headlight pull switch, #36A

https://mossmotors.com/switch-lighting-pull-type?assoc=22943

BritishV8 Forum

General Category => Bodywork, Paint, Interior, Trim, & Wiring => Topic started by: maxwedge5281 on August 15, 2018, 10:29:51 AM