Print Page - I need a water pump and pulley for a 215

Title: I need a water pump and pulley for a 215
Post by: Jahdave on July 02, 2018, 10:46:13 PM

Hi guys,

I inadvertently threw out my old corroded water pump, including pulley, and am having a difficult time sourcing one. Anybody have any spares, ideas? I'd babe so thankful if someone has a spare.

Thanks,
David

Title: Re: I need a water pump and pulley for a 215
Post by: ex-tyke on July 02, 2018, 11:10:04 PM

Water pumps are still readily available - here's one from RockAuto...but probably available from all the major auto parts stores.
https://www.rockauto.com/en/catalog/buick,1962,skylark,3.5l+215cid+v8,1319701,cooling+system,water+pump,2208
Some available on ebay but are pricey
The pulley might be a bit more difficult to source....but you might try D&D (chrome plated pulley part no. 9604)
.http://www.aluminumv8.com/Conversions/Conversions

Title: Re: I need a water pump and pulley for a 215
Post by: MGBV8 on July 09, 2018, 05:37:28 PM

I believe that my water pump pulley is a redrilled Big Block Chevy item.

Title: Re: I need a water pump and pulley for a 215
Post by: mgbv8mike on August 06, 2018, 07:38:41 AM

MGOC have them on special offer this month, compolete with gasket...just bought one last week.

https://www.mgocspares.co.uk/acatalog/MGOC_SPARES_WATER_PUMP__V8__421.html

free postage in UK, might be worthwhile checking it out, it's a non BL replica, but should be OK from the club, fits my Vitesse 3.5 fine.

Title: I need a water pump and pulley for a 215
Post by: Jahdave on August 06, 2018, 10:20:12 AM

-- moved topic --

Title: Re: I need a water pump and pulley for a 215
Post by: Bruce R. on January 21, 2019, 12:31:42 PM

Old Buick v-6 are the same and just about everybody has those.

BritishV8 Forum

General Category => Engine, Transmission, & Rear Axle assy. => Topic started by: Jahdave on July 02, 2018, 10:46:13 PM