BritishV8 Forum

General Category => MG Sports Cars => Topic started by: Jim Stabe on January 06, 2018, 05:30:36 PM

Title: Started to make it red
Post by: Jim Stabe on January 06, 2018, 05:30:36 PM
Here's the hood. Deck lid and doors are next

Hood.JPG
Title: Re: Started to make it red
Post by: rficalora on January 08, 2018, 05:39:26 PM
Looking Great Jim!!  (And saw the color sanded update on the MGE site too)... You're making me feel bad taking so long to paint the hard top I prepped about 6-8 months ago!!
Title: Re: Started to make it red
Post by: Jim Stabe on January 08, 2018, 06:10:59 PM
We haven't had rain for 9 months and then when I want to paint, it starts. Not complaining, we need it desperately. I'd spray the clear in the garage but I'd have to move the car outside and it's not very weather proof.
Title: Re: Started to make it red
Post by: rficalora on January 08, 2018, 07:31:54 PM
They make tarps ;)
Title: Re: Started to make it red
Post by: Jim Stabe on January 13, 2018, 04:05:13 PM
Got the red shot and blocked down with 1500 and started shooting the clear. Got 3 coats on without getting any trash in it and then on the last coat 4 of these bastards made perfect landings while it was still very wet so they sunk down in. After sanding out the bugs, I shot the final coat of clear early in the morning before the bugs woke up and the wind started to blow. Going to let it sit for a few days before I color san and buff.

Bug.JPG

Here's the hood after the 4th coat

Cleared.JPG
Title: Re: Started to make it red
Post by: BWA on January 13, 2018, 04:50:33 PM
Garage painting is a challenge with insects.
I remember many times when I was painting components for my TR6 that before painting there would be no bugs.
I would then start painting and then they would magically appear.
I think they are actually attracted to the thinners in the paint.
You will often see wasps flying around the tops of propane bottles where they vent off.
After much consideration on painting the exterior of the car in my garage I decided not to because of insects and other issues.
I had a guy paint my car in a paint booth that we rented from a body shop.

Keep up the good work Jim, I am looking forward to seeing the final product.

Cheers
Byron
Title: Re: Started to make it red
Post by: Jim Stabe on January 13, 2018, 05:58:40 PM
The bugs aren't bad first thing in the morning so I am planning to do the first 2 coats on one day and do the final the following day 1st thing in the morning. That way I can sand out the trash before I shoot the final coat. Everything will be color sanded and buffed so it isn't that much of an issue. It just turns 1 day in a spray booth into 4 days outside. I'm retired so I have a lot of time to kill anyway.
Title: Re: Started to make it red
Post by: Jim Stabe on January 23, 2018, 02:50:45 PM
Shot the color on the doors and deck lid this morning. A quick wet sand with 1000 tonight and the clear goes on in the morning.

Doors-decklid.JPG

Decklid.JPG
Title: Re: Started to make it red
Post by: lawnvett on January 23, 2018, 04:12:57 PM
Hello Jim,

Looking good there, I'd suggest we go for another ride together but, some other distracted driver might hit you again.

I'm not reeky superstitious .  Just kidding.

I hope the bugs stay away.

PJ
Title: Re: Started to make it red
Post by: Jim Stabe on January 23, 2018, 04:52:08 PM
P.J. - I haven't heard from you in a while, how have you been? I should have it back together by the end of Feb if you want to come out and go for another ride. I think I have the engine quitting problem solved so shouldn't be getting hit again.

I had all three coats done before 10:00 so the bugs aren't awake yet.
Title: Re: Started to make it red
Post by: Scott Costanzo on January 23, 2018, 05:45:55 PM
Jim,

Is your wife ok with a red driveway? :) Mine would be wanting to sever something when she saw it!

Edit: meant to say it looks great! I'm partial to red too.
Title: Re: Started to make it red
Post by: Jim Stabe on January 23, 2018, 05:57:09 PM
The red is just dust that sweeps up. Where I'm doing this is back from the street so it doesn't show anyway. The more I paint on the car the better I like the color. It's not a subtle red.
Title: Re: Started to make it red
Post by: Scott Costanzo on January 23, 2018, 06:28:44 PM
Yes, as you have seen, I like non-subtle red too. Good that it will sweep up.
Title: Re: Started to make it red
Post by: Jim Stabe on February 12, 2018, 04:21:21 PM
This is the first coat of color on the shell, I ran out of activator so I have to wait for the shipment to get here before I can finish.

DSC00513.JPG

DSC00514.JPG
Title: Re: Started to make it red
Post by: rficalora on February 12, 2018, 08:15:45 PM
Purdy!
Title: Re: Started to make it red
Post by: BWA on February 12, 2018, 10:36:49 PM
Wow that red is so bright there is no way a person could not see you on the road!!
Then  again never underestimate the stupidity of drivers these days.
Looks real good.
Title: Re: Started to make it red
Post by: Jim Stabe on February 13, 2018, 01:26:42 AM
It is actually a little darker than what it looks like in the pictures but still very bright, must be due to the lighting. Good ole arrest-me-red.
Title: Re: Started to make it red
Post by: MGBV8 on February 13, 2018, 09:35:28 AM
Yep, gonna get speeding ticket while parked.  :)
Title: Re: Started to make it red
Post by: Jim Stabe on February 14, 2018, 06:12:49 PM
This is closer to what the color actually looks like - 3 coats of red, clear goes on tomorrow

3coatsred.jpg

3coatsred1.jpg
Title: Re: Started to make it red
Post by: Charles on February 14, 2018, 09:09:20 PM
Jim, Very nice.
Did someone say red. I like RED I don't care what color it is.
Title: Re: Started to make it red
Post by: Jim Stabe on March 01, 2018, 08:42:18 PM
I got the clear on and color sanded with 1000, 1500, 2000, and 3000 then broke out the Harbor Freight DA buffer I got for $49 on sale and less 20% with a coupon https://www.harborfreight.com/6-in-57-amp-heavy-duty-dual-action-variable-speed-polisher-62862.html . I wasn't holding my breath for how it would perform but was I surprised. It has a lot of power and is variable speed. The first pass was with McGuire's ultra cut compound on a foam pad (also from HF) and within a minute the shine was there. Even using the most aggressive compound I wouldn't hesitate to take the car to a car show as it sits. Can't wait until I go over it with the medium cut and fine cut compounds. I did the compounding on the #5 speed setting (the fastest is 6) but will use slower speeds for the finer compounds. One caution - shut the buffer off before you lift the pad off the car, at the higher speeds the orbital action causes the pad to fly apart. I'll post some pictures when I get the whole car done and assembled.

DSC00550.JPG
Title: Re: Started to make it red
Post by: lawnvett on March 16, 2018, 08:38:37 PM
wow that is terrific

I'd love to go for another ride.  Next time lets not tour the suburban neighborhoods, lets for find some twists and some deserted roads out in the desert.

PJ

PS I'll bring bail money