BritishV8 Forum

General Category => Classified Ads: Swap Parts Here! => Topic started by: declan on June 10, 2017, 11:18:54 AM

Title: Solid MGB body/shell with clear title
Post by: declan on June 10, 2017, 11:18:54 AM
In St. Charles, MO.

Body/Shell Rubber bumper car converted to chrome bumper, titled as a 1970 in my name. Hi-Tech Collision Repair of St. Louis performed the following work: cut & finished weld header wells, patched side marker lamp holes, patched front frame rails, chrome bumper conversion front and rear, straightened right frame rail, splice left and right fender fronts, re-prime body (etching primer).

My father in law had planned on using this for his V8 project, has extremely little rust. Had been garage kept until just over a month ago.

Has a rear end, dash, steering wheel, I could set a front end aside if someone wanted to work on putting some wheels on it for easier transport. Someone did do an ugly job cutting holes for speakers.

$500
body6.JPG
body5.JPG
body1.JPG
body4.JPG
body7.JPG
IMG_20170402_152307.jpg
Title: Re: Solid MGB body/shell with clear title
Post by: declan on June 21, 2017, 10:22:42 AM
I don't want store this indefinitely or end up as scrap. $250 takes it.
Title: Re: Solid MGB body/shell with clear title
Post by: declan on June 27, 2017, 01:08:56 PM
vin on title and car match
Title: Re: Solid MGB body/shell with clear title
Post by: declan on July 24, 2017, 07:37:51 PM
Make an offer?