Print Page - DIY headers

Title: DIY headers
Post by: danmas on January 01, 2017, 11:25:28 PM

Should be good for at least 20-30HP.
IMG_1055.PNG

Title: Re: DIY headers
Post by: 88v8 on January 02, 2017, 04:49:25 AM

Yes, and the cabin heater should work really well.

Ivor

Title: Re: DIY headers
Post by: BlownMGB-V8 on January 02, 2017, 12:10:21 PM

Being a Tri-Y design it should emphasize the torque peak, no?

Title: Re: DIY headers
Post by: roverman on January 02, 2017, 01:48:55 PM

I would worry bout' plumber cracks...

Title: Re: DIY headers
Post by: tbo on January 05, 2017, 09:28:53 PM

I think the Teflon tape is going to smoke as it comes up to running temp.Nice try though.

Title: Re: DIY headers
Post by: roverman on January 06, 2017, 05:32:34 PM

What car is this ? It seems to have a lot of "elbow room" ?

Title: Re: DIY headers
Post by: BlownMGB-V8 on January 06, 2017, 05:46:53 PM

Teflon gives off poisonous gasses when it burns. Not my first pick for exhaust systems.

Jim

Title: Re: DIY headers
Post by: Moderator on January 06, 2017, 06:50:03 PM

I briefly wondered if someone had rigged up an engine to pump water with four of its eight cylinders.

Title: Re: DIY headers
Post by: MGBV8 on January 10, 2017, 12:04:40 PM

Cuba?

BritishV8 Forum