Text only | Text with Images

BritishV8 Forum

General Category => Engine, Transmission, & Rear Axle assy. => Topic started by: roverman on November 29, 2016, 12:11:15 PM

Title: How to id. Daimler 2.5L hemi head ?
Post by: roverman on November 29, 2016, 12:11:15 PM
I have an aluminum hemi head, about 4.25" bore spacing and push rod actuated. Nobody I show it to can id. it. "Wiki" no help. It has casting and stamped #'s.  What's next ?  If I only found one more.... what a sweet RV8, to me.  Thanks, art.
Title: Re: How to id. Dailer 2.5L hemi head ?
Post by: 88v8 on November 30, 2016, 06:11:49 AM
Might ask here.
Pic... casting #.
http://forum.dloc.co.uk/

Ivor
Title: Re: How to id. Dailer 2.5L hemi head ?
Post by: Moderator on November 30, 2016, 10:03:33 AM
I suppose you've looked at photos here already: http://www.britishracecar.com/JosephDockman-Daimler-SP250.htm?
Title: Re: How to id. Daimler 2.5L hemi head ?
Post by: mgb260 on November 30, 2016, 10:17:04 AM
Art, remember a while back there was a V8 with 4 cylinder Toyota head on it. Does it look like those?

http://forum.britishv8.org/read.php?6,53692
Title: Re: How to id. Daimler 2.5L hemi head ?
Post by: roverman on November 30, 2016, 01:53:58 PM
Ok, none of the above.  Guess I need to get photo capable and start a "name that head" contest ?
Title: Re: How to id. Daimler 2.5L hemi head ?
Post by: Ozzsp250 on December 06, 2016, 11:23:21 PM
I have 3 spare heads for the SP250 however will not have access to them till Saturday (10th Dec) I can photograph them for you to compare.
Title: Re: How to id. Daimler 2.5L hemi head ?
Post by: roverman on December 07, 2016, 12:57:10 PM
That would be great Dennis.  The bore spacing is my first question.  Thanks, art.
Text only | Text with Images