BritishV8 Forum

General Category => Bodywork, Paint, Interior, Trim, & Wiring => Topic started by: RobertE on November 12, 2008, 06:18:09 PM

Title: Fender rolling
Post by: RobertE on November 12, 2008, 06:18:09 PM
I'm wondering if anyone has rolled their mg-b fenders themselves?

A friend of my has a roller and I was wondering what the largest tire is you could get under a rolled fender.

At this point in time I'm trying to avoid adding flares due to time constraints. If worse comes to worse ill rivet on some flares.
Title: Re: Fender rolling
Post by: Dave on November 20, 2008, 11:49:29 AM
Contact Glen Towery. He's been able to use a bottle jack and a shaped piece of oak to spread the width. It's almost unnoticeable.
Title: Re: Fender rolling
Post by: Moderator on November 20, 2008, 12:06:57 PM
Another MGB guy you might want to speak to is Steve Carrick. I know he has one of those Eastwood-type fender rollers... You can find Steve's contact info in the "vendor directory" (under the "Contact" tab, above) - he's the new owner of Advance Auto-Wire.
Title: Re: Fender rolling
Post by: Dave on November 30, 2008, 09:43:22 AM
http://www.eastwoodco.com/shopping/product/detailmain.jsp?itemType=PRODUCT&RS=1&itemID=6159&keyword=31158

There's a video at this site.