Hi,
Anybody have any suggestions on aftermarket gauges? Specifically tach and speedo that fit a Stag 4 in opening and a fuel gauge that works with the Stag sender.
Thanks,
Dan
Well I found Autometer Cobras Look pretty nice similar to original. You'll notice in the pic the speedo goes from right to left that will be interesting!! well I have a right hand drive car so wht the heck!!
AMCobraspeed5_3.jpg
AMCobraTach04_3.jpg
AMCobraoil4_1.jpg
AMCobraH2O5_3.jpg
Not sure if you know about Speedhut....
http://www.speedhut.com/
Amazing customizing available. Not sure about which senders you want to be compatible, but Speedhut's electronic gauges are programable and some come with senders.
Hope it helps.
Steve
Steve,
Thanks, just checked their site according to the dimensions of the gauges 3.848 inches see pic.
My gauge openings are 4 inches. The dash is being re-veenered as we speak so I'll have to measure again when I get them back.
speedhutgaugedimensions_4.jpg
Stagdash6.JPG
The speed hut gauges are awesome. I've been using a set for a few years now and have had no issues.... They customized them how I wanted them and I love how they turned out
Jim
Thanks for the info. I have a 72 ford 302 with a T5 from a late mustang
Cheers,
Dan
Finally got the gauges here they are mounted in the newly veneered Stag gauge cluster with 12 coats of tung oil.
I opted to go with a mahogany grain i like the way it looks when finished in tung oil and everyone does their LBC in burled walnut.
dash_assembled00311008x756.jpg
You can see progress in the projects forum!
They look great Dan. If it were me, I think I'd swap the fact and Speedo. Not sure why, but somehow seems more natural for the sweep to be from the outside toward the center.
Good point I just put them in the same positions