Print Page - bin file for V6 with 5 Speed tranny

Title: bin file for V6 with 5 Speed tranny
Post by: NAS1966 on February 10, 2016, 02:11:01 PM

Hi all.
I am just getting ready to try to program a 27C256 chip for the 1227730 ECM. I did find one
bin file (ATYY88Wcar2.8MPFI 5speed) which is supposed to be for that setup but when I
looked at it only has data for 4 speeds. Does anyone have a .bin file for my set-up:
souped up 2.8L V6 ( 3.1 crank & pistons 0.030 overbored) with a BW 5 speed tranny.

Any help or advise would be appreciated.

Thanks

Title: bin file for V6 with 5 Speed tranny
Post by: NAS1966 on February 11, 2016, 01:12:21 AM

-- moved topic --

BritishV8 Forum

General Category => Engine, Transmission, & Rear Axle assy. => Topic started by: NAS1966 on February 10, 2016, 02:11:01 PM