Text only | Text with Images

BritishV8 Forum

General Category => Engine, Transmission, & Rear Axle assy. => Topic started by: rkas3882 on September 11, 2015, 01:18:20 AM

Title: JDC engineering porting
Post by: rkas3882 on September 11, 2015, 01:18:20 AM
does anyone have any idea if John Carls is still porting cylinder heads? He had a company JDC engineering in Minok Il but I cant find anything on him. thanks,
Randy
Title: Re: JDC engineering porting
Post by: crashbash on September 11, 2015, 09:44:38 PM
He did my 300 heads with big valves a couple years ago.  Will have to find contact info and get back, unless someone has info handy quicker.  Dan Jones, are you there?
Title: Re: JDC engineering porting
Post by: crashbash on September 11, 2015, 09:48:57 PM
Number I have for Jon  Caris is 309 275 2761.
Title: Re: JDC engineering porting
Post by: crashbash on September 11, 2015, 09:55:09 PM
Jon seemed to be big family man with toys and interesting machine shop at home.  Might have lots of things going on.
Title: Re: JDC engineering porting
Post by: Dan Jones on September 25, 2015, 12:57:58 PM
Got in touch with Jon today (left a call back number on his Facebook page).   I'll be sending him my TA Performance Rover heads some time next week.  Sounds like you talked to him too Randy.

Dan Jones
Text only | Text with Images