Text only | Text with Images

BritishV8 Forum

General Category => Engine, Transmission, & Rear Axle assy. => Topic started by: rockea on February 24, 2015, 01:07:32 PM

Title: Buick 215 3/4 speed bellhousing
Post by: rockea on February 24, 2015, 01:07:32 PM
I am using a GM style pressed steel clutch lever and it does not work particularly well with the stock clutch pivot stud.  The stock pivot ball is 7/16", 20 thread and overall length is 1.4" with .5" threaded.
3.5 from a TR8, Rover Pressure Plate with T5 from a Camaro.
I would like to go to an adjustable Pivot Stud but any suggestions would be appreciated.
Thank you
Rocke
Title: Re: Buick 215 3/4 speed bellhousing
Post by: mgb260 on March 14, 2015, 05:09:53 PM
Rocke, Summit carries an adjustable pivot stud.

http://www.summitracing.com/parts/sum-700110/overview/make/chevrolet
Text only | Text with Images