BritishV8 Forum

General Category => Engine, Transmission, & Rear Axle assy. => Topic started by: MGH68 on September 28, 2008, 10:52:04 PM

Title: Cold Start Problem
Post by: MGH68 on September 28, 2008, 10:52:04 PM
Greetings from Australia.
I have recently acquired a 1968 MGB fitted wth a Lucas L-Jetronic fuel injected 3.9 Rover motor which is hard to start from cold.
The cold start injector is OK but not getting any power.
Can anyone tell me whether the power is controlled by the ECU or direct from the ignition circuit.
Any other information welcome.
Doug.