BritishV8 Forum

General Category => Classified Ads: Swap Parts Here! => Topic started by: Richard/SIA on May 11, 2014, 03:10:23 AM

Title: Muncie M20 from 1967 'Vette, $700.00
Post by: Richard/SIA on May 11, 2014, 03:10:23 AM
After all the effort I went through to get this 1967 Corvette M20 trans it's almost silly to sell it.
But I have a chance to grab a Keisler street five speed for about half the new cost.
No overdrive but I can use a taller rear for similar effect thanks to the low first four gears.

Selling the Muncie for what I paid, $700.00
Also have an ex-Camaro T5 bell I will throw in if wanted.
The Muncie is one previous owner and was only taken out to fit a five speed to the 'Vette.
I had it looked at by my local performance trans builder and he said it's good to go once the side cover is resealed.
Sorry, I never bought linkage for it.

I'm in No. Nevada near Reno.
Could be shipped but pick up is better.
Richard, (775) 783-4867
Title: Re: Muncie M20 from 1967 'Vette, $700.00
Post by: Joyridin' on May 11, 2014, 12:54:30 PM
I am sure you know Keisler went belly-up last year, so getting parts in the future may not be too easy. Some place bought them, but not really sure what they actually bought.
Title: Re: Muncie M20 from 1967 'Vette, $700.00
Post by: Richard/SIA on May 11, 2014, 01:46:32 PM
Everything I need appears to be readily available.
Going to cost $400.00 to exchange the MOPAR input for a CHEVY type.
My 327 will hardly strain the Kiesler, just want the lower gears as I won't have the 350 or BB torque.
Title: Re: Muncie M20 from 1967 'Vette, $700.00
Post by: MGBV8 on May 16, 2014, 08:09:04 AM
QuoteI am sure you know Keisler went belly-up last year, so getting parts in the future may not be too easy. Some place bought them, but not really sure what they actually bought.

Looks like the business will continue operate and improve.

http://www.keislerauto.com/ceomessage.html