Print Page - rods 3.9 versus 3.5

Title: rods 3.9 versus 3.5
Post by: rocketsci2001 on March 14, 2014, 08:20:51 PM

I am building a stroker engine for a discovery efi rover

I have a 4.0 block and heads, ford 255 pistons, and a 300 crank. is it just buick 215 rods or will 3.5/3.9 rods fit? same length?
thanks
Sean

Title: Re: rods 3.9 versus 3.5
Post by: mgb260 on March 14, 2014, 08:46:29 PM

Sean, They work also.

BritishV8 Forum

General Category => Engine, Transmission, & Rear Axle assy. => Topic started by: rocketsci2001 on March 14, 2014, 08:20:51 PM