Text only | Text with Images

BritishV8 Forum

General Category => Classified Ads: Swap Parts Here! => Topic started by: Greg55_99 on November 27, 2013, 11:35:27 AM

Title: FS: TR8 and Buick parts
Post by: Greg55_99 on November 27, 2013, 11:35:27 AM
This is what I have:

TR8 engine crossmember - $300
TR8 engine mounts and brackets - $150
TR8 power steering rack (used) - $300
TR8 3.08 rear diff drum to drum - $500
TR8 instrument cluster (needs clear face cover) - $200
TR8 radiator - $100
Buick 215 4-speed bellhousing - $200
Leyland P76 bare block - $200
SD1 exhaust manifolds - $100
1965 Buick 300 cast iron 4 bbl intake - $300
1964 Buick 300 aluminum intake 4 bbl - $300

I am located in Sturbridge, MA. I will also be visiting Toronto next week.

Greg

greg55_99@yahoo.com
Title: Re: FS: TR8 and Buick parts
Post by: markbarnard on January 11, 2014, 11:21:09 AM
Interested in tr8 power steering rack. Thanks. Mark.
Email. Avalonpsc@ yahoo.com or call/ text 319 231 8906
Title: Re: FS: TR8 and Buick parts
Post by: Greg55_99 on January 11, 2014, 10:10:05 PM
Sorry, rack went to Spain.  

Stuff left:

TR8 engine crossmember - $300
TR8 engine mounts and brackets - $100
TR8 3.08 rear diff drum to drum - $500
TR8 instrument cluster (needs clear face cover) - $200
TR8 radiator - $100
TR8/SD1 Federal Fuel Injection system with harness(NO computer) $250
TR8 drive shaft $100
Buick 215 4-speed bellhousing - $200
Leyland P76 bare block - $200
Leyland P76 3.5" stroke crankshaft and flywheel (crank cut 10/10) $400
SD1 exhaust manifolds - $100
1965 Buick 300 cast iron 4 bbl intake - $300
1964 Buick 300 aluminum intake 4 bbl - $300

Greg
greg55_99@yahoo.com
Text only | Text with Images