Text only | Text with Images

BritishV8 Forum

General Category => Classified Ads: Swap Parts Here! => Topic started by: madrvr on November 07, 2007, 04:11:03 PM

Title: For Sale - NEW IN BOX Original MGB-V8 Radiator
Post by: madrvr on November 07, 2007, 04:11:03 PM
I have a brand new MGB V8 radiator for sale. Denver, CO. autoinfo(at)comcast.net
Title: Re: For Sale - NEW IN BOX Original MGB-V8 Radiator
Post by: Phillip G on February 18, 2008, 09:04:07 PM
Mike,

Is the B V8 radiator brass or aluminum ?

Is it much bigger than an 1800 cc B engine radiator.

How much do you need for it ?

Phillip G
Title: Re: For Sale - NEW IN BOX Original MGB-V8 Radiator
Post by: Moderator on February 18, 2008, 09:28:27 PM
Phillip, if it's built to correct original specs, it should measure 14.25" from tank to tank, where the comparable (1800cc MGB) radiator would have measured 10.5". The tanks should be brass, and I believe the core (tubes and fins) should be copper. You can see pictures of similar radiators, installed, several places on this website.

Here's a photo of Dave Wellings' very "original" factory MGB GT V8.
(http://www.britishv8.org/MG/DaveWellings/DaveWellings-AB.jpg)
You can see the hoses a little better here: http://www.britishv8.org/MG/KevinRichards.htm
Title: Re: For Sale - NEW IN BOX Original MGB-V8 Radiator
Post by: Phillip G on February 18, 2008, 09:44:40 PM
Curtis,

Thank you.

Phillip G
Text only | Text with Images