BritishV8 Forum

General Category => MG Sports Cars => Topic started by: Moderator on August 02, 2013, 04:47:49 PM

Title: New HIWD: James Spradlin's MGB w/ 3.4L SFI V6
Post by: Moderator on August 02, 2013, 04:47:49 PM
Here's an exciting one: <a href="http://www.britishv8.org/MG/JamesSpradlin.htm">James Spradlin's 1979 MGB with GM 3.4 SFI V6</a> - examined in 40 photos!

teaser:
(http://www.britishv8.org/MG/JamesSpradlin/JamesSpradlin-BC.jpg)
Title: Re: New HIWD: James Spradlin's MGB w/ 3.4L SFI V6
Post by: rficalora on August 03, 2013, 05:44:08 PM
Looks like James did a great job & Curtis' write-up is great too!
Title: Re: New HIWD: James Spradlin's MGB w/ 3.4L SFI V6
Post by: DocsMG on April 17, 2014, 01:38:34 PM
Finally decided to register on this site.  Getting up to speed on the Colorado Springs meet.

Curtis did an awesome job and he hid alot of 'blemmishes' on my car.  lol  

I hope I can add to the forum here and glean some info as well.  If anyone has any questions about my car and how I did things I am always happy to answer them.

Cheers
James
Title: Re: New HIWD: James Spradlin's MGB w/ 3.4L SFI V6
Post by: avguru on April 18, 2014, 07:48:24 PM
I saw your conversion and looks good. Iam doing a 1967 sunbeam alpine with same engine and trans, I have few questions if you can help.
 
Thanks John
Title: Re: New HIWD: James Spradlin's MGB w/ 3.4L SFI V6
Post by: lawnvett on April 19, 2014, 08:55:23 AM
Hope to see this car and have a chance to meet James in July ,
Title: Re: New HIWD: James Spradlin's MGB w/ 3.4L SFI V6
Post by: DocsMG on April 19, 2014, 10:16:45 AM
I'll be there in July.  We just live up the road.

Here are some pics of how I modified the fuel tank.  I used AN bulkhead fittings from Summit racing and an aftermarket fuel pump Wasbro 455 I think, but I later found a pump from a '89 S10 with 4.3L is cheapest and will work in the tight space.  I am still working on a good sealer.  RTV and other sealants just don't work, so I am going to try JB weld or an epoxy.
205306_553202314714364_1747877368_n.jpg
This is a late model tank.  Careful where you cut due to the baffle.
296514_553202338047695_337788942_n.jpg
Location of bulkhead fittings.
269376_553202324714363_35348041_n.jpg
733914_553202358047693_2117323435_n.jpg
Baffle for the pump.  Filter fits inside.
Title: Re: New HIWD: James Spradlin's MGB w/ 3.4L SFI V6
Post by: DocsMG on April 19, 2014, 10:20:34 AM
205409_553202378047691_36378652_n.jpg
Rod welded to baffle and to cover plate.  Pump is attached to rod with hose clamp.
598675_553202401381022_417054254_n.jpg
Made an indent for wires to pass.  Make sure it is deep enough not to pinch wires.
1486624_722294401138487_1802231020_n.jpg
Changes to coils, wires and air intake since article was written.
Title: Re: New HIWD: James Spradlin's MGB w/ 3.4L SFI V6
Post by: MGBV8 on April 19, 2014, 10:46:56 AM
Send those changes to Curtis.
Title: Re: New HIWD: James Spradlin's MGB w/ 3.4L SFI V6
Post by: DocsMG on April 19, 2014, 11:09:42 AM
Oh, I am sure there will be more changes to come.  Once the paint work is done I will send finished pics to him.  I'm nervous of that day tho.  What would I do then?!?